At Your Fingertips: New Year's manicure
Stamping - beautiful Christmas manicure. This coating or printing a pattern on the nail plate using a punch. To create such a trendy New Year's manicure in 2016 will need to stencil designs, special paint based on acrylic, stamp, and a plastic card to remove excess paint. Stamping is held for a long time - as long as you do not remove the coating itself.
Apply a base, if you will, that the substrate is transparent or lacquered favorite color.
Degrease and the die plate with a pattern. Apply the paint to the selected pattern, or part of it. Wait a couple of seconds.
Card, remove excess paint and attach to the stamp pattern on the diagonal so that the image is completely etched. Put it on the nail plate strongly bending back side bolsters. This should be done quickly - if the paint is dry, design is printed completely.
Attach result of two thin layers of a top cover, paying special attention to the end of the nail.
There are plenty of options for stamping: You can apply only part of the picture, and to finish his brush; add rhinestones, Schiemer, glitter; the substrate can be made in different styles and stamping on him to put (it looks particularly striking on the gradient); advantageously just look contrasting colors of paint and varnish. For example, when a black lacquer made white, silver or gold pattern.
Option №1
1. In all the fingers except the index, apply two coats of blue-gray varnish. On the index finger using a golden hue. Wait until the paint dries. Then put on the little finger of the transparent top coat and, without waiting for drying glue sequins in round cuticle area. On the wet varnish sequins "drown" in the coating, thereby hold out longer.
2. Make a point of the ring of gold and bronze varnish. Immediately (without waiting for drying) fine art brush or toothpick to create chaotic, intersecting lines of dots.
3. On the middle finger of gold lacquer paint brush on the varnish well. To do this, leave it on the tip of a brush small drop. Put it at an angle of 45 degrees with respect to the nail plate itself from the cuticle and make short strokes. Then circle along the contour of the hole fine art bronze brush and paint at the same time not closing the evenness of gold lacquer. Once your design is completely dry, apply a clear topcoat.
Option №2
1. Select 2 nail colors. You can combine both very similar shades of nail polish, and a completely contrasting. Prepare sponge or sponzhik slightly bigger than your fingernail. If you select a sponge, the gradient will be larger and more abrupt. If at least porous sponge, then the transition will be smoother. And armed with a small piece of foil.
2. Decide what color is at the bottom of the cuticle, and some - on the tips. Keep in mind that the transition from light to dark (light shade of nail at the base and dark at the tip) to visually lengthen the nail plate. A change from dark to light (dark at the base of the nail polish and bright at the tip), respectively - will shorten it.
3. Apply a base coat.
4. Cover the nail with a thin layer (that he stayed longer) of varnish shade, which will be at the base of the nail (about the cuticle).
5. At the edge of the sponge or sponge, apply a horizontal strip of varnish, which is located at the base of the nail. Below make a second strip of varnish, which will be on the edge of the nail. Two strips need to go overlap each other to get a smooth transition. The sponge should be thoroughly impregnated with varnish, or color dries instantly. The other edge of the lips should be clean, so you can keep him.
6. Sponge or sponzhik pat on the foil 1 times, so that the colors are mixed, and the excess varnish disappeared.
7. Fast and precise movements of the sponge or sponzhik apply to the nail. If you apply pressure to the sponge, the color will be more crowded, if you press gently, then paler. Do not be afraid to dirty skin blemishes can be removed karandashom- proofreader or a special cloth soaked in nail polish remover.
8. The final stage - top coating or coating with the effect of drying.
Option №3
1. All the nails except the ring, cover with a tight beige lacquer. Let it dry.
2. Dip the brush in fine art black and with the help of her outline of the nail thin line, but not completely, leaving gaps. Then the usual brush of black lacquer make chaotic strokes in different directions. To do this, the brush should be almost dry. Similar smears make purple.
3. On the ring finger, apply two coats of black lacquer.
4. Use a transparent top coat.
Option №4
1. To do this, you will need to design a light bronze varnish, dense nyudovy and terracotta red. As well as matte top coat, round sequins and special adhesive tape for nails in the form of a thin tape or Scotch average normal office tack of which will have their own cut thin strips.
2. Apply two coats of the middle fingers of red nail polish on the little fingers - nyudovogo, and index - bronze.
3. In large and ring fingers stick stripes in places where will be located the transparent parts. Then consistently apply to uncovered parts of the nail colors as you seen in the pictures.
4. Allow coating to dry thoroughly and carefully peel off the strips of tape, then use on all nails except medium gloss topcoat. On average, however, apply a matte.
5. Sequins on the middle finger can be glued with special glue to or on the normally transparent topcoat.
Ombre
Prepare your nails by using the Bond. Use a base coat and nakraste nail varnish. Then apply a special sponge mix of three colors Fernandez, Sally and Amanda. Follow the gradient at the tip pat. Fix the result of top-coating and fast-drying.
HOLIDAY ON THE NAILS
Use the means of Bond and the base. Apply two coats of varnish blue Jean Paul and wait until it is completely dry. Glitter sparkles Wish applied as a triangle - can be 2 fingers or the entire hand. Then make a top-coating and drying.